SnowMobile Information| SnowMobiles

2 questions about my ‘70 something snowmobile?

Posted on Mar 12, 2010 under snowmobile motor |

1 is it hard and what do i need to do to put new scads on the skis?

#2 is it hard on the engine if both carbs arent running the same fuel/air mix?? and how do i get them to the right setting? i know that you turn the litlle screw deal till it idles right but ive never done it to a sled motor
i have no clue about the carbs or jetting. it should be jetted fine becuase the eleveation were at is almost the same as what it was when my dad used to ride it.

its my dads old sled that i dug out and got running now i just need to tune it a bit

First there called scags and they just have three or four little bolts sticking up through the ski, just unbolt and install new ones. It will not hurt the engine to run it that way but performance sucks. we need to know what kind of carbs you have, but one thing i would find out is what jets you have and at what elevation will you be running the machine in and put the proper jets in the carbs.

powered by Yahoo Answers

Related Posts


One Response to “2 questions about my ‘70 something snowmobile?”

  1. By Danny on Mar 12, 2010 | Reply

    First there called scags and they just have three or four little bolts sticking up through the ski, just unbolt and install new ones. It will not hurt the engine to run it that way but performance sucks. we need to know what kind of carbs you have, but one thing i would find out is what jets you have and at what elevation will you be running the machine in and put the proper jets in the carbs.
    References :

Post a Comment